manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 161 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 161

Name

Description

Upload Trusted Certificate

Specifies the trusted certificate used by the phone. You can also
browse and upload the certificates from the local PC by clicking

Browse

 > 

Import

.

Trusted Certificates file to upload

Specifies the name of the certificate file to be uploaded.

The valid value is a string os up to 255 ASCII characters. File
names must be separated by commas without any intervening
spaces.

The default value is empty.

Match Identity to trust certificate

Specifies the status of the TLS server identification.

The options are:

•

Yes (default)

•

No

RFC 5922 certificate compliance

Specifies whether to enable or disable validating the SIP server
certificate for RFC 5922 compliance.

The options are:

•

Enable (default)

•

Disable

Require Key Usage certificate
extension

Specifies whether to enable or disable checking for Key Usage
extensions.

The options are:

•

Enable (default)

•

Disable

Server Certificate re-check hours

Specifies the time interval in hours for rechecking the expiration
and revocation status of the certificates used to establish any
existing TLS connections.

The valid value is an integer from 0 to 32767. The default value is
24 hours.

Warning on number of days
before Certificate expiration

Specifies the number of days before the expiration of a certificate
that a warning must first appear on the phone screen.

The valid value is an integer from 0 to 99. The default value is 60
days.

FQDN IP Mapping

Specifies a FQDN contained in the certificate when an IP address
is used to establish the connection. The parameter is a comma-
separated list of names or value pairs where the name is an FQDN
and the value is an IP address.

The valid value is a string of up to 255 characters without any
intervening spaces. The default value is empty.

Online Certificate Status Protocol (OCSP)

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

161

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments