manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 164 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 164

Name

Description

Phone behavior on Pending
request

Specifies the functioning of the device when performing certificate
enrolment.

The options are:

•

Poll SCEP server periodically in background

•

Wait until a certificate is received or rejected (default)

SCEP Password

Specifies a challenge password to use with SCEP.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “$SERIALNO”.

PKCS12

PKCS12 Address

Specifies the IPv4 or IPv6 URL address, or FQDN from where a
PKCS#12 file is to be downloaded.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.

PKCS12 Password Retry Count

Specifies the number of attempts allowed for password entry.

The valid value is an integer from 0 to 100. The default value is 3
attempts.

Available Identity Certificate

Specifies the trust certificates used as trust points for TLS
connections.

Upload Identity Certificate

Displays available trust certificates for the phone.

You can also browse and upload the certificates from the local PC
by clicking 

Browse

 > 

Import

.

Web Server

Available Webserver Certificate

Specifies the trust certificates used as trust points for TLS
connections.

The valid value must be in 

.pem

 or 

.p12

 formats.

Upload Custom Webserver
Certificate

Specifies the custom certificates to be uploaded.

You can also browse and upload the certificates from the local
machine by clicking 

Browse

 > 

Import

Password for Custom Webserver
Certificate

Specifies the password to decrypt the uploaded certificate.

Configuring Environment Settings

About this task

When you click on any configuration field, the screen displays the details of that field in the

Parameter Help section.

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

164

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments