Avaya J100 Series Installing And Administering Download Page 184

Page: 184 / 528

Parameter name

Default Value

Description

EXCHANGE_AUTH_USERNAME
_FORMAT

Specifies the necessary format of
the username for http
authentication.

Value operation:

• 0: Office 2003/Office2016

username format. Username=
<ExchangeUserDomain
\ExchangeUserAccount> or
Username=
<ExchangeUserAccount> if
<ExchangeUserDomain> is
empty.

• 1: Office 365 format.

Username=
<ExchangeUserAccount@Exch
angeUserDomain> or
Username=
<ExchangeUserAccount> if
<ExchangeUserDomain> is
empty.

EXCHANGE_EMAIL_DOMAIN

Null

Specifies the Exchange email
domain.

The value can contain 0 to 255
characters.

EXCHANGE_NOTIFY_SUBSCRI
PTION_PERIOD

180

Specifies the number of seconds
between re-syncs with the
Exchange server.

Valid values are 0 through 3600.

EXCHANGE_REMINDER_TIME

Specifies the number of minutes
before an appointment at which a
reminder will be displayed.

Valid values are 0 through 60.

EXCHANGE_REMINDER_TONE

Specifies whether or not a tone
will be generated the first time an
Exchange reminder is displayed.

Value operation:

• 0: Tone not generated.

• 1: Tone generated.

Table continues…

Feature and application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

184

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 184 / 528

Search results

Summary of Contents for J100 Series

Reviews: