Parameter name
Default value
Description
L2QSIG
6
Specifies the layer 2 VLAN
priority value for signaling frames
generated by the phone.
Valid values are 0 through 7.
L2QSIG is configured through:
• SET command in the
Settings
file
• AADS
• LLDP
Setting this parameter through
AADS or LLDP overwrites values
in the settings file.
TCP and UDP ports
Avaya J100 Series IP Phones use different protocols, such as TCP and UDP to communicate with
other equipment in the network. Part of this communication identifies which TCP or UDP ports
each piece of equipment uses to support each protocol and each task within the protocol.
Depending on your network, you need to know what ports or ranges are used in the operation of
the phones.
Related links
Received packets (destination = SIP phone)
on page 72
Received packets (destination = SIP phone)
Destination port
Source port
Use
Protocol
UDP or TCP
The number used in the
Source Port field of the
packets that the HTTP
client of the phone sends
Any
Packets that the HTTP
client of the phone
receives
TCP
The number used in the
Source Port field of the
SSL packets that the
HTTP client of the phone
sends
Any
SSL packets that the
HTTP client of the phone
receives
TCP
Table continues…
Servers, VLAN, and IP configuration
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment
72