Avaya J100 Series Installing And Administering Download Page 362

Page: 362 / 528

Parameter name

Default value

Description

ENABLE_SIP_USER_ID

Specifies the display of the
user ID input field on the
Login Screen.

Value operation:

• 0: Disabled

• 1: Enabled

ENABLE_SIPURI_HOST_VALIDATION

Specifies allowing to
accept SIP URI with
unrecognized host part in
INVITE message.

Value operation:

• 0: Does not allow

• 1: Allows

ENABLE_STRICT_USER_VALIDATION

Specifies that the
validation is done for the

To header

and

Request-

URI

against AOR and

Contact

header during

phone registration.

Value operation:

• 0: No validation.

• 1: Validates the phone

registration.

ENABLE_UDP_TRANSPORT

Specifies that the UDP
option is available on the
phone user interface for
selection. The UDP option
is available along with
TCP and TLS.

Value operation:

• 0: Disabled

• 1: Enabled

ENABLE_WEBSERVER

Enables or disables the
web server to configure
the phones in a web
browser.

Value operation:

• 0: Disable

• 1: Enable

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

362

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 362 / 528

Search results

Summary of Contents for J100 Series

Reviews: