Home
/
Avaya
/
J100 Series
/
Installing And Administering

Avaya J100 Series, Installing And Administering, Page: 302 / 528

Share

Page: 302 / 528

Avaya J100 Series Installing And Administering Download Page 302

Parameter name

Default value

Description

BACKGROUND_IMAGE

Null

Specifies custom
background images that
can be loaded from the
provisioning server.

Phone supports up to 5
background images with
the following limitation:

• Only jpeg format files

are supported.

• The maximum file size is

256 KB.

• The file names are case

sensitive.

Avaya J169/J179 IP
Phone, Avaya J159 IP
Phone, and Avaya J139 IP
Phonescreen resolution is
320 pixels x 240 pixels.
Avaya J169/J179 IP
Phone color depth is 16
bits. Avaya J129 IP Phone
screen resolution is 128
pixels x 32 pixels. The files
shall be stored in the
same directory defined by
HTTPDIR / TLSDIR.

Example: SET
BACKGROUND_IMAGE
[xxx.jpg]

BACKGROUND_IMAGE_DISPLAY

Null

Specifies the background
image to be displayed.

Note:

If
BACKGROUND_IMAGE_
SELECTABLE is set to 1,
the end user may override
this setting.

Note:

Avaya J129 IP Phone
does not support this
feature.

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

302

Comments on this document? [email protected]

«
...
300
301
302
303
304
...
»

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments