Avaya J100 Series Installing And Administering Download Page 303

Page: 303 / 528

Parameter name

Default value

Description

BACKGROUND_IMAGE_SELECTABLE

Allows the end user to
select background images.

Value operation:

• 0: The user can not use

a background images
from the phone UI.

• 1: The user can select a

background images from
the phone UI.

Note:

Avaya J129 IP Phone
does not support this
feature.

BACKGROUND_IMAGE_SECONDARY

Null

Specifies a list of
background images to be
used on the secondary
screen. Phone supports
up to 5 background
images with the following
limitation:

• Only jpeg format files

are supported.

• The maximum file size is

256 KB.

• The file names are case

sensitive.

Example:
background_example1.jpg
,background_example2.jp
eg

Note:

This parameter is
supported only in
Avaya J159 IP Phone

Table continues…

List of configuration parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

303

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 303 / 528

Search results

Summary of Contents for J100 Series

Reviews: