manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 468 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 468

Parameter name

Default value

Description

TEAM_BUTTON_REDIRECT_INDICATION

0

Specifies if the redirection
indication must be shown
on a team button on the
monitored station, if it is
not a redirect destination
of the monitored station.

Value operation:

0: Disabled. The redirect
indication is shown only on
a monitoring station which
is redirection destination.

1: Enabled. The
redirection indication is
displayed on all monitoring
stations

Note:

Avaya J129 IP
Phoneand Avaya
J139 IP Phone do not
support Team Button
feature.

TEAM_BUTTON_RING_TYPE

1

Specifies the alerting
pattern to use for team
buttons.

Valid values are 1 through
8. The default value is 1.

Note:

Avaya J129 IP
Phoneand Avaya
J139 IP Phone do not
support Team Button
feature.

Table continues…

Customizable parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

468

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments