Avaya J100 Series Installing And Administering Download Page 268

Page: 268 / 528

Personal data human access controls

User data (in memory)

• No Access

User data (on flash)

• SSH – Limited to Avaya Services login to the “craft” account with EASG authentication. “craft”

account has limited access to filesystem.

• Web Admin – Access is limited to a predefined “admin” account where the password is

defined by the customer. Access is provided to most configuration settings and some user

settings.

Call Logs (on flash)

• No Access

User Passwords (on flash)

• No Access

User data in logs (on flash)

• SSH – Limited to Avaya Services login to the “craft” account with EASG authentication. “craft”

account has limited access to filesystem.

• Web Admin – Access is limited to a predefined “admin” account where the password is

defined by the customer. Access provides the ability to download a Phone Report which

contains log files.

on page 268

Personal data programmatic or API access controls

User data (in memory)

• Internal programmatic access.

User data (on flash)

• None

Call Logs (on flash)

•None

User Passwords (on flash)

•None

User data in logs (on flash)

•None

Related links

Personal data human access controls

on page 268

Data Privacy Controls Addendum

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

268

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 268 / 528

Search results

Summary of Contents for J100 Series

Reviews: