Avaya J100 Series Installing And Administering Download Page 148

Page: 148 / 528

Name

Description

Guest Login

Guest Login Enable

Specifies whether the Guest Login feature is available on the
phone.

The options are:

•

Disable (default)

•

Enable

Guest Login Session Duration
(hours)

Specifies the time interval in hours before a guest or a visiting
user will be automatically logged off if the telephone is idle.

The valid value is an integer from 1 to 12. The default value is 2
hours.

Guest Login Session Warning Time
(minutes)

Specifies the time interval in minutes before a warning of the
automatic logoff is initially displayed for a guest or a visiting
user.

The valid value is an integer from 1 to 15. The default value is 5
minutes.

Save Extension

Show Last Extension

Specifies whether the extension is displayed after logging out.

The options are:

•

Disable (default)

•

Enable

Bluetooth

Bluetooth Enable

Specifies whether Bluetooth can be enabled in the phone menu.

The options are:

•

Disable

•

Enable (default)

CCMS

Media Preservation

Specifies whether a call will be preserved when there is no SIP
connectivity to IP Office.

This setting is applied only in the Avaya Aura

environment.

The options are:

•

Disable

•

Enable (default)

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

148

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 148 / 528

Search results

Summary of Contents for J100 Series

Reviews: