Agilent Technologies InfiniiVision 3000 3024A MSO-X, User Manual

Page: 73 / 424

Math Waveforms
4
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 73
To perform transforms or filters on an arithmetic operation
To perform a transform function (see "Math Transforms" on page 76) or
filter (see "Math Filters" on page 92) on the add, subtract, or multiply
arithmetic operations:
1
Press the
Function
softkey and select
g(t): Internal
.
2
Use the
Operator
,
Source 1
, and
Source 2
softkeys to set up an arithmetic
operation.
3 Press the Function softkey and select f(t): Displayed .
4
Use the
Operator
softkey to select a transform function or filter.
5
Press the
Source 1
softkey and select
g(t)
as the source. Note that
g(t)
is
only available when you select a transform function in the previous
step.
To adjust the math waveform scale and offset
1 Make sure the multiplexed scale and position knobs to the right of the
[Math]
key are selected for the math waveform.
If the arrow to the left of the
[Math]
key is not illuminated, press the
key.
2 Use the multiplexed scale and position knobs just to the right of the
[Math]
key to re- size and re- position the math waveform.
See Also • "Units for Math Waveforms" on page 74
N O T E
Math Scale and Offset are Set Automatically
Any time the currently displayed math function definition is changed, the function is
automatically scaled for optimum vertical scale and offset. If you manually set scale and
offset for a function, select a new function, then select the original function, the original
function will be automatically rescaled.