Agilent Technologies InfiniiVision 3000 3024A MSO-X, User Manual

Page: 273 / 424

Save/Recall (Setups, Screens, Data)
17
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 273
• Press to go — when you can push the Entry knob to navigate to a new
folder or storage location.
•
Location
— when you have navigated to the current folder location (and
are not saving files).
• Save to — when you can save to the selected location.
• Load from — when you can recall from the selected file.
When saving files:
• The proposed file name is shown in the Save to file = line above the
softkeys.
• To overwrite an existing file, browse to that file and select it. To create
a new file name, see
"To enter file names" on page 273.
To enter file names
To create new file names when saving files to a USB storage device:
1 In the Save Menu, press the File Name softkey.
You must have a USB storage device connected to the oscilloscope for
this softkey to be active.
2 In the File Name Menu, use the Spell , Enter , and Delete Character softkeys
to enter the file name:
•
Spell
— press this softkey and turn the Entry knob to select the
character at the current position.
• Enter — press this softkey to enter characters and move the cursor to
the next character position. Pushing the Entry knob is the same as
pressing the
Enter
softkey.
•
Delete Character
— press this softkey to delete the character at the
current position.
When available, the Increment softkey can be used to enable or disable
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.