Agilent Technologies InfiniiVision 3000 3024A MSO-X, User Manual

Page: 5 / 424

Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 5
In This Guide
This guide shows how to use the InfiniiVision 3000 X- Series oscilloscopes.
When unpacking and using the
oscilloscope for the first time, see: • Chapter 1 , “Getting Started,” starting on page 23
When displaying waveforms and
acquired data, see: • Chapter 2 , “Horizontal Controls,” starting on page 47
• Chapter 3 , “Vertical Controls,” starting on page 61
• Chapter 4 , “Math Waveforms,” starting on page 71
• Chapter 5 , “Reference Waveforms,” starting on page
99
• Chapter 6 , “Digital Channels,” starting on page 103
• Chapter 7 , “Serial Decode,” starting on page 123
• Chapter 8 , “Display Settings,” starting on page 129
• Chapter 9 , “Labels,” starting on page 135
When setting up triggers or changing
how data is acquired, see: • Chapter 10 , “Triggers,” starting on page 141
• Chapter 11 , “Trigger Mode/Coupling,” starting on
page 177
• Chapter 12 , “Acquisition Control,” starting on page 185
Making measurements and analyzing
data: • Chapter 13 , “Cursors,” starting on page 203
• Chapter 14 , “Measurements,” starting on page 213
• Chapter 15 , “Mask Testing,” starting on page 239
When using the built-in license
enabled waveform generator, see: • Chapter 16 , “Waveform Generator,” starting on page
251
When saving, recalling, or printing,
see: • Chapter 17 , “Save/Recall (Setups, Screens, Data),”
starting on page 263
• Chapter 18 , “Print (Screens),” starting on page 279
When using the oscilloscope's utility
functions or web interface, see: • Chapter 19 , “Utility Settings,” starting on page 283
• Chapter 20 , “Web Interface,” starting on page 301