Agilent Technologies InfiniiVision 3000 3024A MSO-X, User Manual

Page: 6 / 424

6 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
For reference information, see: • Chapter 21 , “Reference,” starting on page 315
When using licensed serial bus
triggering and decode features, see: • Chapter 22 , “CAN/LIN Triggering and Serial Decode,”
starting on page 335
• Chapter 23 , “FlexRay Triggering and Serial Decode,”
starting on page 351
• Chapter 24 , “I2C/SPI Triggering and Serial Decode,”
starting on page 361
• Chapter 25 , “I2S Triggering and Serial Decode,”
starting on page 381
• Chapter 26 , “MIL-STD-1553/ARINC 429 Triggering and
Serial Decode,” starting on page 391
• Chapter 27 , “UART/RS232 Triggering and Serial
Decode,” starting on page 407
T I P
Abbreviated instructions for pressing a series of keys and softkeys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions
for pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as
follows:
Press [Key1]> Softkey2 > Softkey3.
The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly
below the oscilloscope display.