ABB ACS350 Series, User Manual

Page: 19 / 314

About the manual
19
About the manual
What this chapter contains
The chapter describes the intended audience and compatibility of this manual. It also
contains a flowchart of steps for checking the delivery and installing and
commissioning the drive. The flowchart refers to chapters/sections in this manual.
Compatibility
The manual is compatible with the ACS350 drive firmware version 2.52b or later.
See parameter
3301 FIRMWARE.
Intended audience
This manual is intended for persons who plan the installation, install, commission,
use and service the drive. Read the manual before working on the drive. The reader
is expected to know the fundamentals of electricity, wiring, electrical components
and electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations in the United States are given.
Categorization according to the frame size
The ACS350 is manufactured in frame sizes R0...R4. Some instructions, technical
data and dimensional drawings which only concern certain frame sizes are marked
with the symbol of the frame size (R0...R4). To identify the frame size of your drive,
see the rating table on page
290 in chapter Technical data .
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to
www.abb.com/drives and
selecting Drives – Sales, Support and Service network .
Product training
For information on ABB product training, navigate to www.abb.com/drives and select
Drives – Training courses .
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to www.abb.com/drives , then
select successively Drives – Document Library – Manuals feedback form .