ABB ACS350 Series, User Manual

Page: 206 / 314

Actual signals and parameters
206
3404 OUTPUT1 DSP
FORM Defines the format for the displayed signal (selected by par. 3401 SIGNAL1
PARAM).
DIRECT
+/-0 Signed/Unsigned value. Unit is selected by parameter 3405 OUTPUT 1
UNIT.
Example PI (3.14159):
0
+/-0.0 1
+/-0.00 2
+/-0.000 3
+0 4
+0.0 5
+0.00 6
+0.000 7
BAR METER Bar graph 8
DIRECT Direct value. Decimal point location and units of measure are identical to the
source signal.
Note: Parameters 3402 , 3403 and 3405 ... 3407 are not effective.
9
3405 OUTPUT1 UNIT Selects the unit for the for the displayed signal selected by parameter 3401
SIGNAL1 PARAM.
Note: Parameter is not effective if parameter 3404 OUTPUT1 DSP FORM
setting is DIRECT.
Note: Unit selection does not convert values.
Hz
NO UNIT No unit selected 0
A ampere 1
V volt 2
Hz hertz 3
% percent 4
s second 5
h hour 6
rpm revolutions per minute 7
kh kilohour 8
°C celsius 9
lb ft pounds per foot 10
mA milliampere 11
mV millivolt 12
kW kilowatt 13
W watt 14
kWh kilowatt hour 15
°F fahrenheit 16
hp horsepower 17
MWh megawatt hour 18
m/s meters per second 19
m3/h cubic metres per hour 20
Parameters – complete descriptions
Index Name/Selection Description Def, FbEq
3404 value Display Range
+/-0 + 3 -32768...+32767
+/-0.0 + 3.1
+/-0.00 + 3.14
+/-0.000 + 3.142
+0 3 0....65535
+0.0 3.1
+0.00 3.14
+0.000 3.142