ABB ACS350 Series, User Manual

Page: 236 / 314

Actual signals and parameters
236
SPV1UNDORDLY See selection SPV1OVRORDLY. 45
SPV2UNDORDLY See selection SPV2OVRORDLY. 46
SPV3UNDORDLY See selection SPV3UNDORDLY. 47
CNTR OVER State change when counter value exceeds the limit defined by par. 1905
COUNTER LIMIT. See parameters 1904 ... 1911 .
48
CNTR UNDER State change when counter value is below the limit defined by par. 1905
COUNTER LIMIT. See parameters 1904 ... 1911 .
49
LOGIC VAL State change according to logic operation defined by parameters 8406 ... 8410 50
ENTER SETPNT State change when drive output frequency/speed enters the reference area
(i.e the difference is less than or equal to 4% of the maximum reference). 51
AT SETPOINT State change when drive output frequency/speed equals the reference value
(= is within tolerance limits i.e the error is less than or equal to 1% of the
maximum reference). 52
AI1 L1 & DI5 State change when AI1 value < par. 8412 SEQ VAL 1 LOW value and when
DI5 is active.
53
AI2 L2 & DI5 State change when AI1 value < par. 8414 SEQ VAL 2 LOW value and when
DI5 is active.
54
AI1 H1 & DI5 State change when AI1 value > par. 8411 SEQ VAL 1 HIGH value and when
DI5 is active.
55
AI2 H2 & DI5 State change when AI1 value > par. 8413 SEQ VAL 2 HIGH value and when
DI5 is active.
56
AI1 L1 & DI4 State change when AI1 value < par. 8412 SEQ VAL 1 LOW value and when
DI4 is active.
57
AI2 L2 & DI4 State change when AI1 value < par. 8414 SEQ VAL 2 LOW value and when
DI4 is active.
58
AI1 H1 & DI4 State change when AI1 value > par. 8411 SEQ VAL 1 HIGH value and when
DI4 is active.
59
AI2 H2 & DI4 State change when AI1 value > par. 8413 SEQ VAL 2 HIGH value and when
DI4 is active.
60
DLY AND DI1 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and DI1 is active.
61
DLY AND DI2 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and DI2 is active.
62
DLY AND DI3 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and DI3 is active.
63
DLY AND DI4 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and DI4 is active.
64
DLY AND DI5 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and DI5 is active.
65
DLY & AI2 H2 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and AI2 value > par. 8413 SEQ VAL 2 HIGH value.
66
DLY & AI2 L2 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and AI2 value < par. 8414 SEQ VAL 2 LOW value.
67
DLY & AI1 H1 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and AI1 value > par. 8411 SEQ VAL 1 HIGH value.
68
DLY & AI1 L1 State change when delay time defined by parameter 8424 ST1 CHANGE
DLY has elapsed and AI1 value < par. 8412 SEQ VAL 1 LOW value.
69
Parameters – complete descriptions
Index Name/Selection Description Def, FbEq