ABB ACS350 Series, User Manual

Page: 148 / 314

Actual signals and parameters
148
Parameters – short form list
Parameters – short form list
Index
Name/Selection Description Def Custom
10 START/STOP/DIR The sources for external start, stop and direction control
1001 EXT1 COMMANDS Defines the connections and the source for the start, stop and
direction commands for external control location 1 (EXT1). DI1,2
1002 EXT2 COMMANDS Defines the connections and the source for the start, stop and
direction commands for external control location 2 (EXT2). NOT SEL
1003 DIRECTION Enables the control of rotation direction of the motor, or fixes the
direction. REQUEST
1010 JOGGING SEL Defines the signal that activates the jogging function. NOT SEL
11 REFERENCE SELECT Panel reference type, external control location selection and
external reference sources and limits
1101 KEYPAD REF SEL Selects the type of the reference in local control mode.
REF1
1102 EXT1/EXT2 SEL Defines the source from which the drive reads the signal that
selects between the two external control locations, EXT1 or
EXT2.
EXT1
1103 REF1 SELECT Selects the signal source for external reference REF1. AI1
1104 REF1 MIN Defines the minimum value for external reference REF1. 0
1105 REF1 MAX Defines the maximum value for external reference REF1. Eur: 50 / US: 60
1106 REF2 SELECT Selects the signal source for external reference REF2. AI2
1107 REF2 MIN Defines the minimum value for external reference REF2. 0
1108 REF2 MAX Defines the maximum value for external reference REF2. 100
12 CONSTANT SPEEDS Constant speed selection and values.
1201 CONST SPEED SEL Activates the constant speeds or selects the activation signal. DI3,4
1202 CONST SPEED 1 Defines constant speed (or drive output frequency) 1. Eur: 5 / US: 6
1203 CONST SPEED 2 Defines constant speed (or drive output frequency) 2. Eur: 10 / US: 12
1204 CONST SPEED 3 Defines constant speed (or drive output frequency) 3. Eur: 15 / US: 18
1205 CONST SPEED 4 Defines constant speed (or drive output frequency) 4. Eur: 20 / US: 24
1206 CONST SPEED 5 Defines constant speed (or drive output frequency) 5. Eur: 25 / US: 30
1207 CONST SPEED 6 Defines constant speed (or drive output frequency) 6. Eur: 40 / US: 48
1208 CONST SPEED 7 Defines constant speed (or drive output frequency) 7. Eur: 50 / US: 60
1209 TIMED MODE SEL Selects timed function activated speed into use when parameter
1201 CONST SPEED SEL selection is TIMED FUN1&2. CS1/2/3/4
13 ANALOGUE INPUTS Analog input signal processing
1301 MINIMUM AI1 Defines the minimum %-value that corresponds to minimum mA/
(V) signal for analog input AI1. 0,01
1302 MAXIMUM AI1 Defines the maximum %-value that corresponds to maximum
mA/(V) signal for analog input AI1. 100
1303 FILTER AI1 Defines the filter time constant for analog input AI1, i.e the time
within 63% of a step change is reached.
0.1
1304 MINIMUM AI2 Defines the minimum %-value that corresponds to minimum mA/
(V) signal for analog input AI2.
0,01
1305 MAXIMUM AI2 Defines the maximum %-value that corresponds to maximum
mA/(V) signal for analog input AI2. 100
1306 FILTER AI2 Defines the filter time constant for analog input AI2. 0.1
14 RELAY OUTPUTS Status information indicated through relay output, and relay
operating delays
1401 RELAY OUTPUT 1 Selects a drive status indicated through relay output RO. FAULT(-1)
1404 RO 1 ON DELAY Defines the operation delay for relay output RO. 0
1405 RO 1 OFF DELAY Defines the release delay for relay output RO. 0
15 ANALOGUE OUTPUTS Selection of the actual signals to be indicated through analog
output and output signal processing
1501 AO1 CONTENT SEL Connects a drive signal to analog output AO.
103