ABB ACS350 Series, User Manual

Page: 281 / 314

Fault tracing
281
0028 SERIAL 1 ERR
(7510)
0306 bit 11
(programmable fault
function
3018 , 3019 )
Fieldbus communication break Check status of fieldbus communication. See chapter
Fieldbus control with fieldbus adapter / Fieldbus
control with embedded fieldbus or appropriate
fieldbus adapter manual.
Check fault function parameter settings.
Check connections.
Check if master can communicate.
0030 FORCE TRIP
(FF90)
0306 bit 13
Trip command received from
fieldbus See appropriate communication module manual.
0034 MOTOR PHASE
(FF56)
0306 bit 14
Motor circuit fault due to
missing motor phase or motor
thermistor relay (used in motor
temperature measurement)
fault. Check motor and motor cable.
Check motor thermistor relay (if used).
0035 OUTP WIRING
(FF95)
0306 bit 15
(programmable fault
function
3023 )
Incorrect input power and motor
cable connection (i.e. input
power cable is connected to
drive motor connection).
Check input power connections.
Check fault function parameters.
0036 INCOMPATIBLE SW
(630F)
0307 bit 3
Loaded software is not
compatible. Contact your local ABB representative.
0101 SERF CORRUPT
(FF55)
0307 bit 14
Drive internal error Write down fault code and contact your local ABB
representative.
0103 SERF MACRO
(FF55)
0307 bit 14
0201 DSP T1 OVERLOAD
(6100)
0307 bit 13
0202 DSP T2 OVERLOAD
(6100)
0307 bit 13
0203 DSP T3 OVERLOAD
(6100)
0307 bit 13
0204 DSP STACK ERROR
(6100)
0307 bit 12
0206 MMIO ID ERROR
(5000)
0307 bit 11
CODE FAULT CAUSE WHAT TO DO