Wireless energy sensor, 1-gang Mini
Order No. : 5471 00
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. In so doing, take all the circuit breakers into account, which support dangerous
voltages to the device and or load.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Energy sensor
(1) Status LED, red
(2) Button
Prog
(3) Terminals
3 Function
Intended use
-
Energy sensor for radio transmission of voltage, current and energy values
-
Operation with eNet server
-
Mounting in appliance box according to DIN 49073 with a suitable cover
-
Mounting in surface-mounted housing or built-in housing (accessory) for false ceilings
i
The energy sensor is not officially calibrated and may not therefore be used for invoicing
purposes.
Product characteristics
-
Detection of current and voltage of the connected consumer
-
Calculation of the effective, idle, apparent power and the active energy
-
Event or time-controlled transmission of measured value telegrams to the eNet server
1/8
32581512
11.04.2017
Wireless energy sensor, 1-gang Mini
10864964
