ABB ACS350 Series, User Manual

Page: 204 / 314

Actual signals and parameters
204
0, x…x Parameter index in group 01 OPERATING DATA . E.g. 102 = 0102 SPEED.
0 = not selected.
1 = 1
3202 SUPERV 1 LIM LO Defines the low limit for the first supervised signal selected by parameter
3201 SUPERV 1 PARAM. Supervision wakes up if the value is below the
limit.
-
x…x Setting range depends on parameter 3201 setting. -
3203 SUPERV 1 LIM HI Defines the high limit for the first supervised signal selected by parameter
3201 SUPERV 1 PARAM. Supervision wakes up if the value is above the
limit.
-
x…x Setting range depends on parameter 3201 setting. -
3204 SUPERV 2 PARAM Selects the second supervised signal. Supervision limits are defined by
parameters
3205 SUPERV 2 LIM LO and 3206 SUPERV 2 LIM HI. See
parameter 3201 SUPERV 1 PARAM.
104
x…x Parameter index in group 01 OPERATING DATA . E.g. 102 = 0102 SPEED 1 = 1
3205 SUPERV 2 LIM LO Defines the low limit for the second supervised signal selected by parameter
3204 SUPERV 2 PARAM. Supervision wakes up if the value is below the
limit.
-
x…x Setting range depends on parameter 3204 setting. -
3206 SUPERV 2 LIM HI Defines the high limit for the second supervised signal selected by parameter
3204 SUPERV 2 PARAM. Supervision wakes up if the value is above the
limit.
-
x…x Setting range depends on parameter 3204 setting. -
3207 SUPERV 3 PARAM Selects the third supervised signal. Supervision limits are defined by
parameters
3208 SUPERV 3 LIM LO and 3209 SUPERV 3 LIM HI. See
parameter 3201 SUPERV 1 PARAM.
105
x…x Parameter index in group 01 OPERATING DATA . E.g. 102 = 0102 SPEED 1 = 1
3208 SUPERV 3 LIM LO Defines the low limit for the third supervised signal selected by parameter
3207 SUPERV 3 PARAM. Supervision wakes up if the value is below the
limit.
-
x…x Setting range depends on parameter 3207 setting. -
3209 SUPERV 3 LIM HI Defines the high limit for the third supervised signal selected by parameter
3207 SUPERV 3 PARAM. Supervision wakes up if the value is above the
limit.
-
x…x Setting range depends on parameter 3207 setting. -
33 INFORMATION Firmware package version, test date etc.
3301 FIRMWARE Displays the version of the firmware package.
0.0000…FFFF (hex) E.g. 241A
3302 LOADING PACKAGE Displays the version of the loading package. type
dependent
0x2001…0x20FF
(hex) 0x2001 = ACS350-0x (Eur GMD)
3303 TEST DATE Displays the test date. 00.00
Date value in format YY.WW (year, week)
Parameters – complete descriptions
Index Name/Selection Description Def, FbEq