Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1631 / 1976

I19498
2
1
I12561
2
1
I12560
2
1
- BODY ELECTRICAL POWER WINDOW CONTROL SYSTEM
BE-67
1585
Author: Date:
2001 SIENNA (RM787U)
(d) Continue to apply voltage, and check that the current
changes to less than 1 A with 4 to 90 seconds.
(e) Disconnect the leads from terminals.
(f) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 1 and negative (-) lead
to terminal 2, and check that the window begins to de-
scended.
If operation is not as specified, replace the motor.
8. Passenger ’s door:
INSPECT POWER WINDOW MOTOR PTC THERM-
ISTOR OPERATION
(a) Disconnect the connector from the power window motor.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 2 on the wire harness side connector and the negative
(-) lead to negative terminal of the battery.
(c) Connect the positive (+) lead from the battery to terminal
2 on the wire harness side connector, and raise the win-
dow to the fully position.
(d) Continue to apply voltage and check that the current
changes to less than 1 A within 4 to 90 seconds.
(e) Disconnect the leads from the terminals.
(f) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 1 and the negative (-)
lead to terminal 2, and check that the window begins to
descend.
If operation is not as specified, replace the motor.
9. INSPECT JAM PROTECTION FUNCTION
NOTICE:
Never, ever be caught any part of your body when check-
ing.
HINT:
In case of performing resetting of the limit switch, do checking
after repeating up and down of the glass with automatic opera-
tion.