Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 734 / 1976

I09413
DI4EP-03
I09426
Exampl:
1.2 secs.
0.4 secs.
0.4 secs.
0.4 secs.
Code 1-3
3.2 secs.
Code 2-3
- DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM
DI-503
657
Author: Date:
2001 SIENNA (RM787U)
PRE-CHECK
1. DIAGNOSIS SYSTEM
(a) Check the indicator.
(1)
Turn the ignition switch ON.
(2) Check that the PWR DOOR indicator light comes on
when the RH or LH slide door is open, and that the
indicator light goes off when the RH or LH slide door
is closed.
HINT:
If the indicator light does not light up, troubleshoot the
combination meter (See page
BE-2 ).
Even if RH or LH slide door is closed, when the PWR
DOOR indicator light does not go OFF , initialize the pow-
er slide door control system.
(b) Check the mode 1.
HINT:
In this mode, DTC can be read.
(1) Shift to the P position, turn the ignition switch ON
and power slide door MAIN switch OFF.
(2) Under (1) condition, push the RH or LH power slide
door control switch ON more than 10 times within 10
secs.
(3) After the PWR DOOR indicator light lights up for 3
secs., DTC is indicated by flashing the indicator
light.
HINT:
When more than 2 codes are indicated, the same code is
indicated repeatedly 3 times and after 3.2 secs., the next
code will be indicated.
As an example, codes 1 - 3 and 2 - 3 are shown below.