Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 829 / 1976

AB0118
R13006
AB0119
H01012
H01065
H01164
Airbag
Sensor
Assembly
Side Airbag Sensor
Assembly (RH)
E1 Tc
ACC
ON
or
→ ←
DTC B1140/32
→ ←
DLC1
DI-460
- DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
614
Author: Date:
2001 SIENNA (RM787U)
8 Is DTC B1140/32 out put again?
PREPARATION:
(a)
Connect the connector to the side airbag sensor assem-
bly (RH).
(b) Connect the connector to the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(b) Clear the DTC stored in memory (See step 5 on page
DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
OK:
DTC B1140/32 is not output.
HINT:
Codes other than code B1140/32 may be output at this time, but
they are not relevant to this check.
NG Go to step 9.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.