Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1701 / 1976

H02336
H02337
w/ Power window:
w/o Power window:
BO-10
- BODY FRONT DOOR
1687
Author: Date:
2001 SIENNA (RM787U)
13. REMOVE OUTER WEATHERSTRIP
Using a scraper, remove the outer weatherstrip as shown in the
illustration.
HINT:
Tape the scraper tip before use.
14.
REMOVE DOOR GLASS RUN
15. REMOVE LOWER FRAME
16. REMOVE WINDOW REGULATOR
(a) w/ Power window:
Disconnect the connector.
(b) w/ Power window:
Remove the 6 bolts and window regulator.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(c) w/o Power window:
Remove the 5 bolts, nut and window regulator.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
HINT:
Remove the regulator through the service hole.
HINT:
At the time of reassembly, please refer to the following item.
Apply MP grease to the window regulator.
NOTICE:
At the time of reassembly, please refer to the following
item.
Do not apply grease to the spring of the window regulator.
17.
w/ Power window (driver’s side):
REMOVE WINDOW REGULATOR MOTOR
(a) Place matchmarks on the window regulator motor bracket
and regulator gear.
(b) Using a torx wrench, remove the 3 screws and motor.
HINT:
At the time of reassembly, please refer to the following item.
Align the matchmarks on the regulator motor bracket and regu-
lator gear.
NOTICE:
If having rotated the motor only, reset the motor
(See page
BE-65 ).
HINT:
Never rotate the motor to the down direction until the complete
of the window glass installation.
18.
w/ Power window (passenger’s side):
REMOVE WINDOW REGULATOR MOTOR
Using a torx wrench, remove the 3 screws and motor.