B00890
B00889
Upward
P14235
B00888
Plate Terminal
B01004
CH-16
-
CHARGING
GENERATOR
1255
Author:
Date:
2001 SIENNA (RM787U)
(c)
Install the rectifier holder with the 4 screws.
Torque: 2.9 N·m (30 kgf·cm, 26 in.·lbf)
5.
INSTALL VOLTAGE REGULATOR AND BRUSH
HOLDER
(a)
Place the voltage regulator and brush holder on the recti-
fier end frame.
NOTICE:
Be careful of the holder installation direction.
(b)
Install the 5 screws.
Torque: 2.0 N·m (20 kgf·cm, 18 in.·lbf)
(c)
Place the brush holder cover on the brush holder.
6.
INSTALL REAR END COVER
(a)
Install the end cover and plate terminal with the 3 nuts and
screw.
Torque:
Screw: 3.9 N·m (39 kgf·cm, 35 in.·lbf)
Nut: 4.4 N·m (45 kgf·cm, 39 in.·lbf)
(b)
Install the terminal insulator with the nut.
Torque: 4.1 N·m (42 kgf·cm, 36 in.·lbf)
7.
CHECK THAT ROTOR ROTATES SMOOTHLY
Содержание RM787U
Страница 736: ...DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM DI 505 659 Author Date 2001 SIENNA RM787U f Repeat the step d and e...
Страница 1619: ...BE0EX 03 I03187 Power Outlet BODY ELECTRICAL POWER OUTLET BE 13 1531 Author Date 2001 SIENNA RM787U POWER OUTLET LOCATION...
Страница 1883: ...AC0951 Stator AIR CONDITIONING COMPRESSOR AND MAGNETIC CLUTCH AC 65 1906 Author Date 2001 SIENNA RM787U c Remove the stator...