Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1475 / 1976

H01336
Tires
(5 or More)
R05403
H01337
10 m (33 ft) or more
SST
Battery
Side Airbag
Assembly
H00544
RS-46
- SUPPLEMENTAL RESTRAINT SYSTEM SIDE AIRBAG ASSEMBLY
1496
Author: Date:
2001 SIENNA (RM787U)
(f) Place the tires.
(1)
Place at least 2 tires under the tire to which the side
airbag assembly is tied.
(2) Place at least 2 tires over the tire to which the side
airbag assembly is tied. The top tire should have the
wheel installed.
(3) Tie the tires together with 2 wire harness.
CAUTION:
Make sure that the wire harness are tight. It is very danger-
ous when loose wire harness results in the tires coming
free due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Secure
at least 1 m (3 ft) of slack for the wire harness.
(g) Install the SST.
Connect the connectors of the 2 SST to the side airbag
assembly connector.
SST
09082-00700, 09082-00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
(h)
Deploy the airbag.
(1)
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Check that no one is within 10 m (33 ft) area around
the tire which the side airbag assembly is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(i) Dispose of the side airbag assembly.
CAUTION:
The side airbag assembly is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
Use gloves and safety glasses when handling a side
airbag assembly with the deployed airbag.
Do not apply water etc. to a side airbag assembly with
the deployed airbag.