Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1179 / 1976

CO083-04
S04532
Stud Bolt
Jiggle Valve
15
°
15
°
- COOLING THERMOSTAT
CO-13
1173
Author: Date:
2001 SIENNA (RM787U)
INSTALLATION
1. PLACE THERMOSTAT IN WATER PUMP
(a) Install a new gasket on to the thermostat.
(b) Align the thermostat jiggle valve with the upper stud bolt,
and insert the thermostat in the water inlet housing.
HINT:
The jiggle valve may be set within 15
°
of either side of the pre-
scribed position.
2.
INSTALL WATER INLET
Install the water inlet with the 3 nuts.
Torque: 8.0 N·m (80 kgf·cm, 69 in.·lbf)
3. INSTALL WATER INLET PIPE
(a) Install a new O-ring to the water inlet pipe.
(b) Apply soapy water to the O-ring.
(c) Connect the water inlet pipe to the water inlet.
(d) Install the bolt holding the water inlet pipe to the cylinder
head.
Torque: 19.5 N·m (200 kgf·cm, 14 ft·lbf)
4. INSTALL ENGINE WIRE PROTECTOR
5. CONNECT ECT SWITCH CONNECTORS
6. REINSTALL AIR CLEANER CAP WITH AIR CLEANER
HOSE
7. FILL WITH ENGINE COOLANT
8. START ENGINE AND CHECK FOR LEAKS
9. RECHECK ENGINE COOLANT LEVEL