Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1443 / 1976

SR0DB-02
R12807
Washer
Retaining Ring
SST
F13544
F03683
SR-18
- STEERING TILT STEERING COLUMN
1414
Author: Date:
2001 SIENNA (RM787U)
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
COAT WITH MOLYBDENUM DISULFIDE LITHIUM
BASE GREASE (See page
SR-9 )
2. INSTALL TILT LEVER
Install the tilt lever with the tilt lever lock shaft.
3. INSTALL MAIN SHAFT ASSEMBLY
(a) Install the inner race, upper bearing inner race seat, com-
pression spring and spring retainer.
(b) Install a new retaining ring to the main shaft assembly.
(c) Install the washer of SST to the main shaft assembly.
(d) Install SST to the main shaft assembly, as shown in the
illustration.
SST
09612-07010
(e) Using SST, push down the retaining ring until it fits into the
shaft groove.
NOTICE:
Do not bend the universal joint of the main shaft assembly
more than 20
°
.
HINT:
Hold the main shaft assembly with your hand so that it does not
rotate.
4. INSTALL LOWER SHAFT ADAPTER AND LOWER
SHAFT BUSHING
Align a ditch of the tube and projection of the lower shaft bush-
ing, and install the lower shaft adapter and lower shaft bushing
in the column tube assembly.
5.
INSTALL STEERING COLUMN HOUSING SUPPORT
(a) Install the 2 new tilt No. 1 stopper.
(b) Install the steering column housing support with the 4 new
torx bolts.
Torque: 19 N·m (190 kgf·cm, 14 ft·lbf)
6. INSTALL STEERING COLUMN HOUSING
(a) Install the steering column housing with the main shaft as-
sembly into the column tube assembly.
(b) Install the tilt spring and spring guide.
(c) Using a vise to hold the column housing and column
housing support.
(d) Temporarily install 2 new pivot pins.