Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1473 / 1976

H17014
AB0163
Wire Harness
Diameter
Stripped Wire Harness Section
RS-44
- SUPPLEMENTAL RESTRAINT SYSTEM SIDE AIRBAG ASSEMBLY
1494
Author: Date:
2001 SIENNA (RM787U)
HINT:
The airbag deploys simultaneously as the LED of SST activa-
tion switch lights up.
2.
DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG
ASSEMBLY
NOTICE:
When disposing of the side airbag assembly only,
never use the customer’s vehicle to deploy the air-
bag.
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Have a battery ready as the power source to deploy the airbag.
(a)
Remove the seatback assembly (See page RS-39 ).
(b) Open the fastener of the seatback cover.
(c) Remove the side airbag assembly from the seatback as-
sembly.
CAUTION:
When storing the side airbag assembly, keep the upper sur-
face of the airbag deployment side facing upward.
(d) Using a service-purpose wire harness, tie down the side
airbag assembly to the tire.
Wire harness: Stripped wire harness section
1.25 mm
2
or more (0.0019 in
2
. or more)
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the side airbag assembly, it may be
snapped by the shock when the airbag is deployed. This is
highly dangerous. Always use a wire harness for vehicle
use which is at least 1.25 mm
2
(0.0019 in
2
.).
HINT:
To calculate the square of the stripped wire harness section-
Square = 3.14 x (Diameter)
2
divided by 4