Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1529 / 1976

Transmission
Error DC
*2 01
(Communication
Control) Transmission to component shown
by auxiliary code has bee failed.
(This code does not necessarily
mean actual failure.) If same auxiliary code is recorded in
other component(s), check harness
for power supply and communica-
tion system of components shown
sub code.
Master Reset
(Momentary
Interruption) DD
*3 01
(Communication
Control)
Check harness for power supply
system of radio receiver assembly
assembly.
Check harness for communica-
tion system of radio receiver as-
sembly assembly.
If error occurs frequently, replace
radio receiver assembly.
Registration
Completion
Instruction
Error E0
*1 01
(Communication
Control) ”Registration Completion Instruc-
tion” command fromradio receiver
assembly cannot be received. Since this DTC is provided for engi-
neering, it may be detected when
no actual failure exists.
ON/OFF
Instruction
Parameter
Error E2 01
(Communication
Control) Error is detected in ON/OFF control
command from radio receiver as-
sembly assembly. Replace radio receiver assembly .
Registration
Request
Transmission E3 01
(Communication
Control) Since this DTC is provided for engi-
neering, it may be detected when
no actual failure exists.
Registration Request command
is output from slave component.
By reception of connection check
Instruction, Registration Request
command is output from sub-mas-
ter component.
After engine is started, radio receiv-
er assembly assembly was discon-
nected from system.
Master Error DF
*4 01
(Communication
Control) Due to defective condition of com-
ponent with a display, master func-
tion is switched to audio equip-
ment . Error occurs in communica-
tion between sub-master (audio)
and master component. Check harness for power supply
of radio receiver assembly assem-
bly.
Check harness for communica-
tion system of radio receiver as-
sembly assembly.
Check harness for communica-
tion system between radio receiver
assembly and sub-master compo-
nent.
Audio proces-
sor ON error
E1
*1 01
(Communication
Control)
While source equipment is operat-
ing, AMP output is stopped.
Check harness for power supply
system of radio receiver assembly
Check harness for communication
system of radio receiver assembly.
BE-122
- BODY ELECTRICAL AUDIO SYSTEM
1640
Author: Date:
2001 SIENNA (RM787U)