Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1043 / 1976

S08027
Inward
Sensor
EM0B6-06
A01802
10 mm
Hexagon
Wrench
Plate Washer
P20025
P20069
Fulcrum
Length
SST
SST
EM-22
- ENGINE MECHANICAL TIMING BELT
965
Author: Date:
2001 SIENNA (RM787U)
INSTALLATION
1. INSTALL CRANKSHAFT TIMING PULLEY
(a) Align the pulley set key with the key groove of the timing
pulley, and slide on the timing pulley.
(b) Install the timing pulley, facing the sensor side inward.
NOTICE:
Do not scratch the sensor part of the crankshaft timing
pulley.
(c)
Install the timing belt plate with the bolt.
Torque: 8.0 N·m (80 kgf·cm, 69 in.·lbf)
2. INSTALL NO.1 IDLER PULLEY
Adhesive: Part No. 08833-00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(a) Using a 10 mm hexagon wrench, install the plate washer
and idler pulley with the pivot bolt.
Torque: 34 N·m (350 kgf·cm, 25 ft·lbf)
(b) Check that the pulley bracket moves smoothly.
3. INSTALL NO.2 IDLER PULLEY
(a) Install the idler pulley with the bolt.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
(b) Check that the idler pulley moves smoothly.
4. INSTALL RH CAMSHAFT TIMING PULLEY
(a) Face the flange side of the timing pulley outward.
(b) Align the knock pin on the camshaft with the knock pin
groove of the timing pulley, and slide on the timing pulley.
(c) Using SST, install the pulley bolt.
SST
09249- 63010, 09960- 10010 (09962- 01000,
09963-01000)
Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)
HINT:
Use a torque wrench with a fulcrum length of 340 mm (13.39
in.).
5.
INSTALL LH CAMSHAFT TIMING PULLEY
(a) Face the flange side of the timing pulley inward.