Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1320 / 1976

W03086
F02267
1
2
F01195
Bolt
Adjusting
Value
Set Bolt
15’
30’
Adjusting Bolt
90105-17001 90105-17003 90105-17004 90105-17005
45’
1
°0
0’
1
°15
’
1
°
30’
1 2 1 2 1 2 1 2
1 Dot 2 Dots 3 Dots
- SUSPENSION AND AXLE FRONT WHEEL ALIGNMENT
SA-5
1292
Author: Date:
2001 SIENNA (RM787U)
5. ADJUST CAMBER
NOTICE:
After the camber has been adjusted, inspect the toe-in.
(a)
Remove the front wheels and ABS speed sensor clamp.
(b) Remove the 2 nuts on the lower side of the shock absorb-
er.
(c) Coat the threads of the nuts with engine oil.
(d) Temporarily install the 2 nuts.
(e) Adjust the camber by pushing or pulling the lower side of
the shock absorber in the direction in which the camber
adjustment is required.
(f) Tighten the nuts.
Torque: 210 N·m (2,150 kgf·cm, 155 ft·lbf)
(g) Install the front wheels.
Torque: 104 N·m (1,050 kgf·cm, 77 ft·lbf)
(h) Check the camber.
HINT:
Try to adjust the camber to the center value.
Adjusting value for the set bolts is 6’ - 30’ (0.1
°
- 0.5
°
).
If the camber is not within the specification, using the table be-
low, estimate for how much additional camber adjustment will
be required, and select the camber adjusting bolt.
(i) Follow the above mentioned steps again. Between step
(b) and (c), exchange 1 or 2 selected bolts.
HINT:
When exchanging the 2 bolts, exchange 1 bolt for each time.