Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1005 / 1976

EM0B8-05
A10518
5 mm
Hexagon
Wrench
A06658
(h)
(i)
(j)
- ENGINE MECHANICAL CYLINDER HEAD
EM-33
976
Author: Date:
2001 SIENNA (RM787U)
REMOVAL
NOTICE:
Do not remove or install the camshaft timing gear (VVT-i)
beside changing VVT-i or the camshaft.
1.
REMOVE OUTER FR COWL TOP PANEL ASSEMBLY
(See page
BO-35 )
2. DRAIN ENGINE COOLANT
3. REMOVE RH FENDER APRON SEAL
4. REMOVE GENERATOR DRIVE BELT
(See page
CH-7 )
5. REMOVE PS PUMP (See page SR-24 )
6. REMOVE FRONT EXHAUST PIPE (See page EM-76 )
7. REMOVE RH ENGINE MOUNTING STAY
8. REMOVE V-BANK COVER
(a) Using a 5 mm hexagon wrench, remove the 3 cap nuts.
(b) Loosen the V-bank cover fastener counterclockwise.
(c) Remove the V-bank cover.
9. REMOVE AIR CLEANER HOSE WITH RESONATOR
10. REMOVE AIR INTAKE CHAMBER ASSEMBLY
(a) Disconnect the accelerator cable.
(b) Disconnect the throttle position sensor connector.
(c) Disconnect the IAC valve connector.
(d) Disconnect the No.1 VSV connector for the ACIS.
(e) Disconnect the No.2 VSV connector for the ACIS.
(f) Disconnect the VSV connector for the EVAP.
(g) Remove the 2 nuts, and disconnect the PS pressure tube
from the No.1 engine hanger.
(h) Disconnect the PCV hose from the PCV valve on the RH
cylinder head.
(i) Disconnect the ground strap and cable from the intake air
control valve for the ACIS.
(j) Disconnect the ground cable from the air intake chamber.
(k) Disconnect the brake booster vacuum hose from the air
intake chamber.