Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1277 / 1976

AT3785
AX11J-01
AT0103
Q04713
D00641
AX-6
- AUTOMATIC TRANSAXLE VALVE BODY ASSEMBLY
1262
Author: Date:
2001 SIENNA (RM787U)
VALVE BODY ASSEMBLY
ON-VEHICLE REPAIR
1. REMOVE DRAIN PLUG AND DRAIN ATF
Using a hexagon wrench, remove the drain plug and drain the
fluid into the suitable container.
2.
REMOVE OIL PAN AND GASKET
Remove the 17 bolts.
NOTICE:
Some fluid will remain in the oil pan.
Remove oil pan bolts, and carefully remove the oil
pan assembly.
Discard the gasket.
3. REMOVE 3 MAGNETS FROM OIL PAN
4. EXAMINE PARTICLES IN PAN
Remove the magnets and use them to collect any steel chips.
Look at the chips and particles in the pan and magnet carefully
to anticipate what type of wear you will find in the transaxle.
Steel (magnetic): bearing, gear and plate wear
Brass (non-magnetic): bushing wear
5. REMOVE OIL STRAINER AND OIL PIPE BRACKET
(a) Remove the 3 bolts and oil strainer.
NOTICE:
Be careful as oil will come out of the strainer when it is re-
moved.
(b)
Remove the gasket from the oil strainer.
(c) Remove the 3 bolts and oil pipe bracket.
6. REMOVE MANUAL VALVE BODY
(a) Remove the 2 bolts and detent spring.