Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1007 / 1976

P20049
Gasket
A05077
Clamp
Clamp
Clamp
A10531
A10519
- ENGINE MECHANICAL CYLINDER HEAD
EM-35
978
Author: Date:
2001 SIENNA (RM787U)
(c) Disconnect the ground strap connector.
(d) Disconnect the upper radiator hose.
(e) Disconnect the engine coolant reservoir hose.
(f) Remove the 2 bolts, 2 nuts and 2 plate washers.
(g) Disconnect the water bypass hose, and remove the water
outlet.
(h) Remove the 2 gaskets.
13. REMOVE IGNITION COILS
14. REMOVE SPARK PLUGS
15. REMOVE TIMING BELT (See page EM-16 )
16. REMOVE CAMSHAFT TIMING PULLEYS
(See page
EM-16 )
17. REMOVE NO.2 IDLER PULLEY (See page EM-16 )
18. REMOVE NO.3 TIMING BELT COVER
(a) Disconnect the 3 engine wire clamps from the timing belt
cover.
(b) Remove the 6 bolts and timing belt cover.
19. REMOVE CAMSHAFT POSITION SENSORS
20. REMOVE CAMSHAFT TIMING OIL CONTROL VALVES
21. DISCONNECT ENGINE WIRE PROTECTOR FROM
REAR SIDE
Remove the nut, and disconnect the engine wire protector from
the RH cylinder head.
22. DISCONNECT ENGINE WIRE AND PROTECTOR
FROM RH SIDE
Remove the 5 nuts, and disconnect the engine wire and protec-
tor from the RH cylinder head cover.