Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1413 / 1976

W03102
Rack Guide
Spring Cap
Lock Nut
SST
SST
Fulcrum
Length
R11667
Claw
F03861
Fulcrum Length
SST
SR-50
- STEERING POWER STEERING GEAR
1446
Author: Date:
2001 SIENNA (RM787U)
16. INSTALL RACK GUIDE SPRING CAP LOCK NUT
(a) Apply sealant to 2 or 3 threads of the rock guide spring
cap lock nut.
Sealant:
Part No.08833-00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(b) Temporarily install the rack guide spring cap lock nut.
(c) Using a hexagon wrench (21 mm), hold the rack guide
spring cap and using SST, torque the rack guide spring
cap lock nut.
SST
09922-10010
Torque: 50 N·m (510 kgf·cm, 37 ft·lbf)
NOTICE:
Use SST 09922-10010 in the direction shown in the illustra-
tion.
HINT:
Use a torque wrench with a fulcrum length of 345 mm (13.58
in.).
(d)
Recheck the total preload.
Preload (turning):
0.8 - 1.4 N·m (8 - 14 kgf·cm, 6.9 - 12.2 in.·lbf)
(e) Remove the RH and LH rack ends.
17. INSTALL RH AND LH CLAW WASHERS AND RACK
ENDS
(a) Install a new claw washer, and temporarily install the rack
ends.
HINT:
Align the claws of the claw washers with the steering rack
grooves.
(b) Using a spanner (24 mm), hold the steering rack steadily
and using SST, torque the rack end.
SST
09922-10010
Torque: 60 N·m (610 kgf·cm, 44 ft·lbf)
NOTICE:
Use SST 09922-10010 in the direction shown in the illustra-
tion.
HINT:
Use a torque wrench with a fulcrum length of 345 mm (13.58
in.).