Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1046 / 1976

A01803
P12983
Length = 1410 mm (55.51 in.)
P18815
- ENGINE MECHANICAL TIMING BELT
EM-25
968
Author: Date:
2001 SIENNA (RM787U)
(b) Check that the timing marks of the RH and LH timing pul-
leys with the timing marks of the No.3 timing belt cover as
shown in the illustration.
If the marks do not align, remove the timing belt and reinstall it.
(c)
Remove the crankshaft pulley bolt.
11. INSTALL RH ENGINE MOUNTING BRACKET
Torque: 28 N·m (290 kgf·cm, 21 ft·lbf)
12. INSTALL NO.2 TIMING BELT COVER
(a) Check that the timing belt cover gasket has no cracks or
peeling, etc.
If the gasket has cracks or peeling, etc., replace it using these
steps:
Using a screwdriver and gasket scraper, remove all
the old gasket material.
Thoroughly clean all components to remove all the
loose material.
Remove the backing paper from a new gasket and
install the gasket evenly to the part of the timing belt
cover shaded black in the illustration.
After installing the gasket, press down on it so that
the adhesive firmly sticks to the timing belt cover.
(b) Install the timing belt cover with the 5 bolts.
Torque: 8.5 N·m (85 kgf·cm, 74 in.·lbf)
(c) Install the engine wire protector clamps to the No.3 timing
belt cover.
13. PINSTALL TIMING BELT GUIDE
Install the timing belt guide, facing the cup side outward.
14.
INSTALL NO.1 TIMING BELT COVER
(a) Check that the timing belt cover gaskets have cracks or
peeling, etc.
If the gasket has cracks or peeling, etc., replace it using these
steps:
Using a screwdriver and gasket scraper, remove all
the old gasket material.
Thoroughly clean all components to remove all the
loose material.