Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1815 / 1976

H02637
BO23W-03
H02634
H07401
H07338
BO-16
- BODY SLIDE DOOR
1693
Author: Date:
2001 SIENNA (RM787U)
REMOVAL
1. REMOVE SLIDE DOOR
(a) Remove the 2 bolts and open striker.
Torque: 7.0 N·m (71 kgf·cm, 62 in.·lbf)
(b) Remove the rear door check cover.
(c) Remove the screw, then using a screwdriver, remove the
center rail garnish.
HINT:
Tape the screwdriver tip before use.
(d) w/o Power slide door:
Remove the bolt and center rail protector.
Torque: 9.8 N·m (100 kgf·cm, 7 ft·lbf)
(e) Remove the upper rail cushion.
(f) w/ Power slide door:
Remove the 2 bolts from the slide door.
(g) Slide the slide door rearward, remove each hinge from the
rails and slide door.
2. REMOVE BACK DOOR SCUFF PLATE
(See page
BO-75 or BO-79 )
3. REMOVE SLIDE DOOR SCUFF PLATE
(See page
BO-75 or BO-79 )
4. REMOVE SPEAKER GRILLE
(See page
BO-75 or BO-79 )
5. REMOVE QUARTER TRIM COVER
(See page
BO-75 or BO-79 )
6. REMOVE QUARTER TRIM PANEL
(See page
BO-75 or BO-79 )