-
DIAGNOSTICS
ABS WITH EBD & BA & TRAC & VSC SYSTEM
DI-343
497
Author:
Date:
2001 SIENNA (RM787U)
INSPECTION PROCEDURE
HINT:
Start the inspection from step 1 in case of using the TOYOTA hand-held tester and start from step 2 in case
of not using the TOYOTA hand-held tester.
1
Check operation of the SLIP indicator light.
PREPARATION:
(a)
Connect the TOYOTA hand-held tester to the DLC3.
(b)
Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.
(c)
Select the ACTIVE TEST mode on the TOYOTA hand-held tester.
CHECK:
Check that ”ON” and ”OFF” of the SLIP indicator light can be shown on the combination meter with the TOY-
OTA hand-held tester.
OK
NG
2
Check that the SLIP indicator light is ON for 3 seconds immediately after ignition
switch is turned ON.
OK
No problem.
NG
3
Check SLIP indicator light.
See combination meter troubleshooting on page
NG
Repair or replace bulb or combination meter.
OK
Содержание RM787U
Страница 736: ...DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM DI 505 659 Author Date 2001 SIENNA RM787U f Repeat the step d and e...
Страница 1619: ...BE0EX 03 I03187 Power Outlet BODY ELECTRICAL POWER OUTLET BE 13 1531 Author Date 2001 SIENNA RM787U POWER OUTLET LOCATION...
Страница 1883: ...AC0951 Stator AIR CONDITIONING COMPRESSOR AND MAGNETIC CLUTCH AC 65 1906 Author Date 2001 SIENNA RM787U c Remove the stator...