Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1283 / 1976

Q04716
Z12139
A
B
Q04712
AX-12
- AUTOMATIC TRANSAXLE VALVE BODY ASSEMBLY
1268
Author: Date:
2001 SIENNA (RM787U)
25. INSTALL MANUAL VALVE BODY AND DETENT
SPRING
(a) Align the manual valve with the pin on the manual shaft
lever.
(b) Lower the manual valve body into place.
(c) Hand tighten the 5 bolts first. Then, tighten them with a
torque wrench.
Torque: 11 N·m (110 kgf·cm, 8 ft·lbf)
HINT:
Each bolt length is indicated below.
Bolt length:
Bolt A: 22 mm (0.866 in.)
Bolt B: 37 mm (1.457 in.)
(d) Place the detent springs on the manual valve body and
hand tighten the 2 bolt first.
Then, tighten them with a torque wrench.
Torque: 11 N·m (110 kgf·cm, 8 ft·lbf)
HINT:
Each bolt length is indicated below.
Bolt length:
Bolt A: 14 mm (0.551 in.)
Bolt B: 37 mm (1.457 in.)
(e) Check that the manual valve lever is touching the center
of the detent spring tip roller.
26. INSTALL PIPE BRACKET AND OIL STRAINER
(a) Install the oil pipe bracket with the 3 bolts.
Torque: 10 N·m (100 kgf·cm, 7 ft·lbf)
(b) Place a new gasket to the oil strainer.
(c) Install the oil strainer with the 3 bolts.
Torque: 11 N·m (110 kgf·cm, 8 ft·lbf)
(d) Each bolt length is indicated below.
Bolt length:
Bolt A: 22 mm (0.866 in.)
Bolt B: 53 mm (2.087 in.)
27. INSTALL 3 MAGNETS INPLACE
NOTICE:
Make sure that the magnets do not interfere with the oil
pipes.