P18783
1.27 mm
Hexagon
Wrench
P18765
P20028
1.27 mm
Hexagon
Wrench
P18808
EM-24
-
ENGINE MECHANICAL
TIMING BELT
967
Author:
Date:
2001 SIENNA (RM787U)
(d)
Align the installation marks on the timing belt with the tim-
ing marks of the camshaft timing pulleys.
(e)
Install the timing belt in this order:
1st: Crankshaft timing pulley
2nd: Water pump pulley
3rd: LH camshaft timing pulley
4th: No.2 idler pulley
5th: RH camshaft timing pulley
6th: No.1 idler pulley
8.
SET TIMING BELT TENSIONER
(a)
Using a press, slowly press in the push rod using 981 -
9,807 N (100 - 1,000 kgf, 200 - 2,205 lbf) of pressure.
(b)
Align the holes of the push rod and housing, pass a 1.27
mm hexagon wrench through the holes to keep the set-
ting position of the push rod.
(c)
Release the press.
(d)
Install the dust boot to the tensioner.
9.
INSTALL TIMING BELT TENSIONER
(a)
Temporarily install the tensioner with the 2 bolts.
(b)
Alternately tighten the 2 bolts.
Torque: 27 N·m (280 kgf·cm, 20 ft·lbf)
(c)
Remove the 1.27 mm hexagon wrench from the tension-
er.
10.
CHECK VALVE TIMING
(a)
Slowly turn the crankshaft 2 revolutions, and align the tim-
ing marks of the crankshaft timing pulley and oil pump
body.
NOTICE:
Always turn the crankshaft clockwise.
Содержание RM787U
Страница 736: ...DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM DI 505 659 Author Date 2001 SIENNA RM787U f Repeat the step d and e...
Страница 1619: ...BE0EX 03 I03187 Power Outlet BODY ELECTRICAL POWER OUTLET BE 13 1531 Author Date 2001 SIENNA RM787U POWER OUTLET LOCATION...
Страница 1883: ...AC0951 Stator AIR CONDITIONING COMPRESSOR AND MAGNETIC CLUTCH AC 65 1906 Author Date 2001 SIENNA RM787U c Remove the stator...