Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1702 / 1976

H02338
H02339
H03705
H03952
- BODY FRONT DOOR
BO-1 1
1688
Author: Date:
2001 SIENNA (RM787U)
19. REMOVE DOOR LOCK
(a) Remove the inside locking link protector.
(b) Disconnect the inside handle opening link.
(c) Using a clip remover, remove the bellcrank and clamp.
(d) Disconnect the locking link assembly.
(e) w/ Power door lock:
Disconnect the connector.
(f) Disconnect the 2 links from outside handle and door lock
cylinder.
(g) Using a torx wrench, remove the 3 screws and door lock.
Torx wrench: T30 (Part No. 09042-00010 or locally
manufactured tool)
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
HINT:
Remove the door lock through the service hole.
HINT:
At the time of reassembly, please refer to the following items.
Apply adhesive to 3 screws.
Part No. 08833-00070, THREE BOND 1324 or equiva-
lent
Apply MP grease to the sliding and rotating parts of the
door lock.
20. REMOVE OUTSIDE HANDLE WITH DOOR LOCK CYL-
INDER
(a) Disconnect the connector, then remove the clamps.
(b) Remove the cap, 2 bolts and outside handle with door
lock cylinder.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)
(c) Remove the bolt and door lock cylinder from the outside
handle.
Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)