Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1522 / 1976

Normal Mode
Service Check Mode
Physical Address
(When checking, P160 is blinking.)
A long beep (3 sec.)
3 beeps
Memory Clear Mode
After 3 sec.
P160
CLr
Example:
Connection parts ( physical address): Multi Display (P160), Radio Receiver (P190), CD changer (P360)
Turn ignition switch ON.
Push the ”TAPE
CD” switch 3
times while pressing ”ch1” and
”ch6” switches.
HINT:
To exit from diagnosis mode,
press the ”TAPE
CD” switch for
1.7 sec. or turn ignition switch to
ACC or OFF
ECHN
”ECHN” Detail
Display Mode
(Refer to (b))
CHEC
”CHEC” Detail
Display Mode
(Refer to (c))
Physical Address
P190
Physical Address
P360
OLD
”OLD” Detail
Display Mode
(Refer to (d))
Result (Replacing)
Result (Check)
Result (Old)
After the memory is cleared, only the physical address is displayed cyclically.
TUNE UP
TUNE UP
TUNE UP
TUNE UP
TUNE DOWN
TUNE DOWN
TUNE DOWN
TUNE DOWN
TUNE DOWN
TUNE UP
ch5 (1.7 sec.)
: Indicates a switch operation
ch2
ch3
ch2
ch3
ch2
ch3
When re-checking (ch1 switch is pressed) in that condition, the result is also
displayed as shown above.
- BODY ELECTRICAL AUDIO SYSTEM
BE-1 15
1633
Author: Date:
2001 SIENNA (RM787U)
(c) Display Screen for Service Check.