Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1445 / 1976

SR0D8-03
F02576
Torx Screw
Screw Case
F02578
Airbag Connector
Correct Wrong
F02579
Matchmarks
SST
- STEERING TILT STEERING COLUMN
SR-1 1
1407
Author: Date:
2001 SIENNA (RM787U)
REMOVAL
1. REMOVE STEREO COMPONENT CONTROLLER AS-
SEMBLY
Remove the stereo component controller assembly.
2.
REMOVE STEERING WHEEL PAD
NOTICE:
If the airbag connector is disconnected with the ignition
switch at ON or ACC, DTCs will be recorded.
(a) Place the front wheels facing straight ahead.
(b) Using a torx socket wrench, loosen the 2 torx screws until
the groove along the screw circumference catches on the
screw case.
(c) Pull out the wheel pad from the steering wheel and dis-
connect the airbag connector.
CAUTION:
When storing the wheel pad, keep the upper surface
of the pad facing upward.
Never disassemble the wheel pad.
NOTICE:
When removing the wheel pad, take care not to pull the air-
bag wire harness.
3. REMOVE STEERING WHEEL
(a) Disconnect the connector.
(b) Remove the steering wheel set nut.
(c) Place matchmarks on the steering wheel and main shaft
assembly.
(d) Using SST, remove the steering wheel.
SST
09950-50012 (09951-05010, 09952-05010,
09953-05020, 09954-05020)
4. REMOVE FRONT DOOR INSIDE SCUFF PLATE