Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 820 / 1976

H01017
H02139
AB0118 AB0119
R13006 H01085
H02217
P/T Squib (LH)
Airbag
Sensor
Assembly
PL+ PL-
ACC
or
DTC B0138/72
ON
→ ←
E1
Tc
DLC1
- DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
DI-451
605
Author: Date:
2001 SIENNA (RM787U)
3 Check airbag sensor assembly.
PREPARATION:
(a)
Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect PL+ and PL- of the connec-
tor (on the seat belt pretensioner side) between the seat
belt pretensioner (LH) and the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory
(See step 5 on page
DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
OK:
DTC B0138/72 is not output.
HINT:
Codes other than code B0138/72 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK