Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1461 / 1976

H10756
AB0163
Wire Harness
Diameter
Stripped Wire Harness Section
RS-32
- SUPPLEMENTAL RESTRAINT SYSTEM FRONT PASSENGER AIRBAG ASSEMBLY
1482
Author: Date:
2001 SIENNA (RM787U)
CAUTION:
The front passenger airbag assembly is very hot
when the airbag is deployed, so leave it alone for at
least 30 minutes after deployment.
Use gloves and safety glasses when handling a front
passenger airbag assembly with the deployed airbag.
Do not apply water etc., to a front passenger airbag
assembly with the deployed airbag.
Always wash your hands with water after completing
the operation.
(1)
When scrapping a vehicle, deploy the airbag and
scrap the vehicle with the front passenger airbag
assembly still installed.
(2) When moving a vehicle for scrapping which has a
front passenger airbag assembly with deployed air
bag, use gloves and safety glasses.
2. DEPLOYMENT WHEN DISPOSING OF FRONT PAS-
SENGER AIRBAG ASSEMBLY
NOTICE:
When disposing of the front passenger airbag assem-
bly only, never use the customer’s vehicle to deploy
the airbag.
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Have a battery ready as the power source to deploy the airbag.
(a)
Remove the front passenger airbag assembly.
(See page
RS-27 )
CAUTION:
Store the front passenger airbag assembly with the airbag
deployment side facing upward.
(b) Fix the front passenger airbag assembly to a tire.
(1)
Use a service-purpose wire harness for tying down
the front passenger airbag assembly.
Wire harness: Stripped wire harness section
1.25 mm
2
or more (0.0019 in
2
or more)
HINT:
To calculate the square of the stripped wire harness section:
Square = 3.14 x (Diameter)
2
divided by 4