Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 18 / 1976

DTC No.
Indicates the diagnostic trouble code.
Page or Instructions
Indicates the page where the inspection procedure
for each circuit is to be found, or gives instructions
for checking and repairs.
Detection Item
Indicates the system of the problem or
contents of the problem.
Trouble Area
Indicates the suspect area of the
problem.
Mass Air Flow Circuit Malfunction
Detection Item
Open or short in mass air flow meter circuit
Mass air flow meter
ECM
DTC No.
(See page)
Trouble Area MIL* Memory
P0100
(DI-24)
P0101
(DI-28)
P0115
(DI-33)
Open or short in intake air temp. sensor
circuit
Intake air temp. sensor
ECM
Intake Air Temp. Circuit
Malfunction
P0110
(DI-29)
Open or short in engine coolant temp. sensor circuit
Engine coolant temp. sensor
ECM
Throttle/ Pedal Position Sensor/Switch
”A” Circuit Malfunction
Engine Coolant Temp.
Circuit Malfunction
Open or short in throttle position sensor circuit
Throttle position sensor
ECM
DTC CHART (SAE Controlled)
HINT:
Parameters listed in the chart may not be exactly the same as your reading due to the type of instrument or other
factors.
If a malfunction code is displayed during the DTC check mode, check the circuit for that code listed in the table
below. For details of each code, turn to the page referred to under the ”See page” for the respective ”DTC No.”
in the DTC chart.
Mass Air Flow Circuit
Range/ Performance Problem
Mass air flow meter
Throttle position sensor
Throttle/ Pedal Position Sensor/ Switch
”A” Circuit Range / Performance Prob-
lem
P0116
(DI-37)
Engine Coolant Temp.
Circuit Range/ Performance Problem
Engine coolant temp. sensor
Cooling system
- INTRODUCTION HOW TO TROUBLESHOOT ECU CONTROLLED
SYSTEMS
IN-27
27
Author: Date:
2001 SIENNA (RM787U)
4. DIAGNOSTIC TROUBLE CODE CHART
The inspection procedure is shown in the table below. This table permits efficient and accurate troubleshoot-
ing using the diagnostic trouble codes displayed in the diagnostic trouble code check. Proceed with trouble-
shooting in accordance with the inspection procedure given in the diagnostic chart corresponding to the
diagnostic trouble codes displayed. The engine diagnostic trouble code chart is shown below as an example.