H01024
AB0118
AB0119
R13006
H01077
H01202
→ ←
E1
Tc
ACC
ON
or
DTC B0105/53
DLC1
Airbag
Sensor
Assembly
P Squib
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
DI-391
545
Author:
Date:
2001 SIENNA (RM787U)
4
Check P squib.
PREPARATION:
(a)
Turn the ignition switch to LOCK.
(b)
Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Connect the front passenger airbag assembly connector.
(d)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to LOOK, and wait at least for 20
seconds.
(b)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(c)
Clear the DTC stored in memory (See page
).
(d)
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(f)
Check the DTC (See page
OK:
DTC B0105/53 is not output.
HINT:
Codes other than code B0105/53 may be output at this time, but
they are not relevant to this check.
NG
Replace front passenger airbag assembly.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
Содержание RM787U
Страница 736: ...DIAGNOSTICS POWER SLIDE DOOR CONTROL SYSTEM DI 505 659 Author Date 2001 SIENNA RM787U f Repeat the step d and e...
Страница 1619: ...BE0EX 03 I03187 Power Outlet BODY ELECTRICAL POWER OUTLET BE 13 1531 Author Date 2001 SIENNA RM787U POWER OUTLET LOCATION...
Страница 1883: ...AC0951 Stator AIR CONDITIONING COMPRESSOR AND MAGNETIC CLUTCH AC 65 1906 Author Date 2001 SIENNA RM787U c Remove the stator...