Toyota RM787U, Руководство по обслуживанию и ремонту

Страница: 1321 / 1976

F02245
F02246
SA0028
A: Inside
B: Outside
A B
Front
B A
SA-6
- SUSPENSION AND AXLE FRONT WHEEL ALIGNMENT
1293
Author: Date:
2001 SIENNA (RM787U)
6. ADJUST TOE-IN
(a) Remove the boot clamps.
(b) Loosen the tie rod end lock nuts.
(c) Turn the left and right rack ends an equal amount to adjust
the toe-in.
HINT:
Try to adjust the toe-in to the center value.
Make sure that the length of the left and right rack ends
are the same.
Rack end length difference:
1.5 mm (0.059 in.) or less
(d) Torque the tie rod end lock nuts.
Torque: 74 N·m (750 kgf·cm, 55 ft·lbf)
(e) Place the boot on the seat and install the clip it.
HINT:
Make sure that the boots are not twisted.
7. INSPECT WHEEL ANGLE
Turn the steering wheel fully, and measure the turning angle.
Inside wheel
34
°
19’
±
1
°
(34.32° ±
1
°)
Outside wheel
< Reference >
30
°
19’
(30.32°)
If the wheel angles differ from the specification, check the left
and right rack end lengths.